---

 

product description

 

The high-quality oxidized asphalt is used, the long-fiber polyester felt is used as the base, and the colored sintered ceramsite is the coil covering material, which is made into a tile pattern or a pure color of the color-colored or painted-type waterproofing membrane.

 

 

 

---

 

Features

 

5 levels, simplified and simplified, waterproof decoration in one step.

 

 

 

The decorative effect is good, the structure level is small, the process is simple and reliable, and the cost is low.

 

 

 

No matter the wind, sun or rain, the color is bright and durable.

It is made of colored ceramsite coated with glaze at a temperature above 650 °C, which is effective against ultraviolet rays and high temperature damage.

 

 

The tile design scheme is professional, the program is diverse, the color is gorgeous, and the three-dimensional sense is strong.

 

 

 

Creates a colorful roof space with richer colors than grey schist coils.

 

 

---

 

Specification model

 

thickness	3.0mm
width	1000mm
length	10m

 

---

 

 

Scope of application

 

Applicable to the roof waterproofing project that pursues the colorful effect of the roof and the high requirements for waterproofing.

New or repaired waterproofing works for slope roofs and non-senior flat roofs.

 

---

 

Construction process

 

 

Grassroots requirements

The base layer is dry and solid, free of sediment, garbage, no empty drums, loose, sanding.

 

Coating treatment agent

Spray or roll the matching base treatment agent to the base layer to ensure that the base treatment agent is uniform and full of the base layer.

 

Trial roll

The coil material is spread out on the base surface, and the elastic wire or the overlapping edge of the adjacent coil material is aligned to ensure the overlapping width, and the stress is released after being released.

 

Hot melt paving

The flame is baked on the lower surface and the base surface of the coil, and the gel melts and rolls the coil in time, and is compacted and exhausted, so that the coil and the base surface are closely adhered.

 

Lap processing

At the same time of hot-melt laying, press the lap joint with a pressure roller to extrude 5~8mm molten asphalt (considered as reliable lap joint).

 

---

 

Engineering case

 

click the link

 

 

---

 

Performance

 

Q/LDY 0004-2016 "TPC painted pottery / Li Cai cover waterproofing membrane"

pull	Elongation	Tear strength	Heat resistance	Low temperature compliance
500N/50mm	≥30%	200N	90℃，2hNo displacement, runny, dripping	-20℃No crack

 

 

---