Welcome to Liaoning Dayu Group official website!
WeChat public address
Liaoning Dayu waterproof technology development group
Address: Panjin new waterproofing material industry base (Panchen County, Panshan county)
Tel:0427-5912993
Fax:0427-5912992
http://www.dayu-group.com
PC:124121
Mobile web site
ICP
Copyright ©2018 Liaoning Dayu waterproof 辽ICP备11019533号
Product application
Planting roofs
Municipal Engineering
SBS elastomer modified asphalt waterproofing membrane
product description
The SPL (styrene-butadiene rubber) is used as the main modifier to modify and thicken the petroleum asphalt, and then with other polymer hydrophilic auxiliary additives to make the coil rubber, and then the high-quality filament The polyester felt is a pre-laid polyester tire self-adhesive waterproofing membrane made of a tire base, and the waterproof layer can be sealed with the structure, thereby solving the problem of leakage of hydrophobic water.
product description
The high-quality long-fiber polyester felt is used as the base material, and the petroleum asphalt is modified with SBS thermoplastic elastomer rubber (styrene-butadiene-styrene) as a modifier to prepare a rubber layer dip coating material. Fine sand, mineral pellets or polyethylene film is an elastomer modified asphalt waterproofing membrane made of cladding material.
Features
(1) High tensile strength, good tear resistance, good dimensional stability, and strong adaptability to deformation of the base layer.
(2) Excellent corrosion resistance, mildew resistance and weather resistance.
(3) Excellent puncture resistance, smash resistance and fatigue resistance.
(4) Hot-melt construction, the molten asphalt body is lapped, the bonding is reliable, the lap joint is firm, and all seasons are suitable.
(5) Excellent high and low temperature resistance, can achieve low temperature -25 °C without brittle fracture, high temperature 105 °C does not flow.
Specification model
Bonding surface |
PE (vinyl film), S (fine sand), M (slate) |
thickness |
3.0mm/4.0mm/5.0mm |
width |
1000mm |
length |
7.5m/10m |
Scope of application
Widely used in various industrial and civil building roofs. Waterproof and moisture proof works in underground and other parts;
The slate surfacing coil is suitable for the exposed waterproof layer; the vinyl film or fine sand coated coil is suitable for the non-exposed waterproof layer.
Construction process
Grassroots requirements
The base layer is dry and solid, free of sediment, garbage, no empty drums, loose, sanding.
Coating treatment agent
Spray or roll the matching base treatment agent to the base layer to ensure that the base treatment agent is uniform and full of the base layer.
Trial roll
The coil material is spread out on the base surface, and the elastic wire or the overlapping edge of the adjacent coil material is aligned to ensure the overlapping width, and the stress is released after being released.
Hot melt paving
The flame is baked on the lower surface and the base surface of the coil, and the gel melts and rolls the coil in time, and is compacted and exhausted, so that the coil and the base surface are closely adhered.
Lap processing
At the same time of hot-melt laying, press the lap joint with a pressure roller to extrude 5~8mm molten asphalt (considered as reliable lap joint).
Performance
Elastomer modified asphalt waterproofing membrane (GB18242-2008)
Serial number |
project |
model |
|
---|---|---|---|
I |
II |
||
1 |
Pulling force (N/50mm)≥ |
500 |
800 |
2 |
Elongation (%) ≥ |
30 |
40 |
3 |
Heat resistance °C (no runny, dripping) |
90 |
105 |
4 |
Low temperature flexibility (°C) |
-20 |
-25 |
5 |
Impervious MPa (30min) |
0.3 |